Rightest GM250S, User Manual

Page: 14 / 40

27 26
Performing a Blood Test
2. Pull off the depth adjustable cap.
3. Insert a new disposable lancet firmly into lancet carrier.
Twist off and set aside the protective cover of the disposable lancet.
5. Replace the depth adjustable cap.
4.
1
2 3
4 5
1. Hold the adjustable cap in one hand and hold the hub in the other hand. Bend the cap
towards the down side. When a gap appears between the cap and hub, pull them in opposite
directions.
Performing a Blood Test
6
7 8
9
10
6. Choose a depth of penetration by rotating the top portion of the depth adjustable cap until the
setting depth matches the window. Settings are based on skin type " " for soft or thin skin;
" " for average skin; " " for thick or calloused skin.
7. Hold the hub in one hand and pull on the plunger in the other hand. The device will be
cocked. Release the plunger, it will automatically move back to its original position
near the hub.
8. Wash your hands with warm soapy water and dry thoroughly.
®
9. Take one Rightest GS250S Blood Glucose Test Strip from the vial. Re-cap the vial
cap immediately.
®
10. Insert the strip into the strip port of the Rightest GM250S Blood Glucose Meter with
the indication symbol facing up. The meter confirms the insertion of the strip with a
beep (if volume is turned on).
NOTE
® The Rightest GM250S Blood Glucose Meter will automatically detect the Code
number on strip. You don't have to check the Code number on the meter display and
strip vial.