4
GENERAL INFORMATION
GENERAL INFORMATION
3
DESCRIPTION OF THE APPLIANCE
R
RBS 2S Ready-i
double-coil solar heaters, with pre-fitted
vertical solar station, are available in four different models, and
can be integrated in solar systems for the production of domes-
tic hot water.
The most important technical features of these solar storage cyl-
inders are:
− the accurate study of tank and coil geometry
− internal glazing, bacteriologically inert, to ensure the
max. hygiene of treated water, reduce limescale deposits
and make cleaning operations easier
− insulation made of expanded polyurethane free from CFC
(chlorofluorocarbons)
− a flange for easy cleaning and maintenance of the an-
ti-corrosion magnesium anode
− solar station enclosed in a panelling, used also for solar
system washing, filling and emptying as well as for cir-
culator removal
The main components of the solar station are:
− high-efficiency circulator with variable speed (already
hard-wired)
− solar regulator (already hard-wired), as indicated in par-
agraph "Safety and control devices"
− shut-off valves as non-return valves
− thermometers
− pressure gauge
− fitting for connection to a solar expansion tank
− suitable safety device, as indicated in paragraph "Safety
and control devices"
4
SAFETY AND CONTROL DEVICES
Equipment safety and setting are achieved thanks to:
− Safety valve with trigger pressure set at 6 bar;
− Solar Regulator for circulator management/control. Man-
ages 9 system diagrams that can be selected. Refer to the
specific manual for further details.
5
IDENTIFICATION
The
R
RBS 2S Ready-i
solar heaters can be identified by:
Data plate
This lists the technical specifications and performance of the
product.
Model
bar
W
l
W
kW
l/1'
BOLLITORE SOLARE
Modello
Matricola
Codice
Anno
m
2
m
2
kW
m
2
T067765IES
SOLARBOILER
Serial numb.
Code
Year
Dispersioni secondo EN 12897
Heat loss according to EN 12897
V-Hz
Alimentazione elettrica
Power supply
Matricola
Serial number
Modello
Model
Potenza elettrica assorbita
Electrical consumption
Capacità del bollitore
Storage cylinder capacity
Press. esercizio max.
Maximum working pressure of storage cylinder
Superficie serpentino inferiore
Bottom coil heat exchange surface area
Superficie serp. inf.
Bottom coil heat exch.
Superficie serpentino superiore
Top coil heat exchange surface area
Produzione acqua calda sanitaria - serp. sup. [∆T 35°C]
Domestic hot water production – top coil [∆T 35°C]
Massima potenza assorbita sup. [T° Primario 80°C]
Power absorbed by top coil [T° primary 80°C]
Max pot. assorb. sup.
Power abs. by top coil
Collegamento di terra obbligatorio -
Connexión a tierra obligatoria
Obligatory ground connection
RIELLO S.p.A.
Via Ing.Pilade Riello 7
37045 Legnago (VR) - ITALY
RIELLO S.p.A.
Via Ing.Pilade Riello 7
37045 Legnago (VR) - ITALY
Modelo
Código
N° Fabric.
Año
Potencia absor bida max.se rp.sup. [T° Pri mário 80°C]
Producción de agua caliente sanitaria - serp. sup. [∆T 35°C]
Superficie serpentín superior
Superficie serpentín inferior
Presión máxima de fun cio namiento
Capacidad del interacumulador
Potencia eléctrica
absorbida
Alimentación eléctrica
Dispersiones según EN 12897
N° Fabric.
Modelo
Pot. absor. max.serp.sup.
Sup. serpentín inf.
INTERACUMULADOR SOLAR
surf. area
Serial number plate
This specifies the serial number and model.
9
If these plates or any other means of clearly identifying
the product are defaced, removed or lost, proper instal-
lation and servicing may be rendered difficult.
