3
GENERAL INFORMATION
GENERAL INFORMATION
1
GENERAL SAFETY INFORMATION
9
Check that the product is complete, undamaged and as or-
dered as soon as you receive it. Report any discrepancies or
damage to the
R
dealer who sold it.
9
This product must be installed by a legally qualified heat-
ing engineer. On completion of the installation, the install-
er must issue the owner with a declaration of conformity
confirming that the installation has been completed to the
highest standards in compliance with the instructions pro-
vided by
R
in this instruction manual, and that it con-
forms to all applicable laws and standards.
9
This product must only be used for the purpose for which it
is designed and made, as specified by
R
.
R
declines
all responsibility, contractual or other, for damage to prop-
erty or injury to persons or animals caused by improper in-
stallation, adjustment, maintenance or use.
9
The product must be serviced at least once a year. Servicing
must be arranged in advance with the
R
Technical Assis-
tance Service.
9
All servicing and repairs must be performed by a qualified
heating engineer.
9
If water leaks from the storage cylinder, turn off the water
supply and contact
R
’s Technical Assistance Service or a
qualified heating engineer immediately.
9
If the product is not going to be used for an extended peri-
od of time, contact the manufacturer’s Technical Assistance
Service to have at least the following operations performed:
− Close the shut-off cocks for the domestic hot water circuit
− Shut down the boiler connected to the storage cylinder
as instructed in its own manual
− Switch the storage cylinder OFF at the control panel (if
fitted) and at the mains power switch
− Drain the central heating circuit and domestic hot water
circuit if there is any risk of freezing.
9
This instruction manual is an integral part of the product. It
must be kept safe and must ALWAYS accompany the product,
even if it is sold to another owner or transferred to another
user or to another installation. If you lose this manual, or-
der a replacement immediately. Keep the product purchase
documents to be presented to the
R
authorised Technical
Assistance Service to request a service call under warranty.
9
Size the solar expansion tank so as to ensure complete ab-
sorption of the expansion of the fluid contained within the
system, with reference to the prevailing regulations on the
matter. In particular, consider fluid characteristics, consid-
erable fluctuation of service temperature and vapour that
might be generated during solar collector stagnation stage.
Proper size of expansion tank ensures setting off of all vol-
ume changes of the heat transfer fluid, avoiding excessive
pressure increase. Limited pressure changes avoid reach-
ing safety valve opening pressure and the consequent fluid
drainage.
2
PRECAUTIONS
The operation of any appliance that uses electrical power de-
mands that a number of fundamental safety precautions be re-
spected. In particular:
0
Never attempt to install the system without using suitable
personal protection equipment and without following all
applicable occupational safety standards.
0
It is forbidden to touch the device while barefoot or with
wet or moist body parts.
0
It is forbidden to perform any technical or cleaning opera-
tions before having disconnected the device from its elec-
trical power supply, by setting the system's main switch to
"off".
0
It is forbidden to pull, detach, or twist the electrical cables
protruding from the device, even if it is disconnected from
its electrical power supply.
0
Do not expose the storage cylinder to the elements. It is not
designed for use outdoors.
0
If solar plant pressure decreases, it is forbidden to top up
with only water as there is a danger of freezing and over-
heating.
0
Do not use connections or safety devices or fittings (expan-
sion vessels, pipes, insulation) that are not specifically de-
signed and tested for use in solar water heating systems.
0
Do not allow children or infirm persons to operate the sys-
tem unsupervised.
0
Do not dispose of packaging material into the environment,
or leave it within the reach of children, since it can become
a potential hazard. Dispose of packaging material in com-
pliance with applicable legislation.
0
It is forbidden to use the panelling as a hold for handling
purposes.
General information
