RIEJU RS3 50, Owner'S Manual

Page: 157 / 280

65
RS3 50
CHAIN ADJUSTMENT AND TENSION CHAIN ADJUSTMENT AND TENSION
CONTROL AND REGULATION
The moped must be positioned vertically with its wheels on the firmly on
the ground.
For the adjustment of the chain you must adjust both sides of the rear
axle at the same time.
The chain must be adjusted to have a tolerance of 30 to 40 mm. At the
midpoint between the output gear and the rear sprocket (see picture).
ATTENTION ATTENTION
The chain should be kept in perfect cleanliness and be properly
lubricated each week.
ATTENTION ATTENTION
To adjust to the correct tension YOU must perform these steps
on both sides of the wheel.
= =
MAINTENANCE
Ofrecido por www.electromanuales.com