RIEJU RS3 50, Owner'S Manual

Page: 158 / 280

66
RS3 50
A C B
30 a 40 mm.
To do this, follow these steps:
1 - Set the gearbox in neutral.
2 - Loosen the nut (A) that secures the rear wheel axle.
3 - Loosen the 2 nuts (B).
4 - Using the bolts (C) adjust the chain tension, ensuring it is always
the same distance on both sides of the axle. To do so use the
rule marks on of the swing arm.
5 - Set the position using the 2 nuts (B).
6 - Tighten the nut (A) that secures the rear wheel axle.
MAINTENANCE
Ofrecido por www.electromanuales.com