RIEJU RS3 50, Owner'S Manual

Page: 155 / 280

63
RS3 50
REAR WHEEL REAR WHEEL
REMOVING THE REAR WHEEL
CAUTION CAUTION
Place the motorcycle on a flat and firm surface before attempting to remove the rear wheel.
ATTENTION
ATTENTION
Suspend the moped from the rear to ensure the rear tyre is off the ground.
ADVICE
ADVICE
Place a wooden block between the rear swing arm and the ground to make it easier to realign the rear tyre with the
holes.
To remove the rear wheel, follow these steps:
1 - Loosen the nut (A) that secures the rear wheel axle.
2 - Loosen the lock nuts (B) of the chain tension.
3 - Tighten the screw (C) to the end.
4 - Push the wheel so the chain (D) becomes loose.
5 - Release the chain (D).
6 - Remove the wheel axle, to release the spacer (G).
7 - Remove the wheel and the brake disc will exit the brake caliper.
B C A E
D
F
MAINTENANCE
Ofrecido por www.electromanuales.com