RIDGID Micro CM-100, Original Instructions Manual

Page: 9 / 428

micro CM-100 Digital Clamp Meter
7
Controls
Figure 3 – micro CM-100 Digital Clamp Meter Controls
Icons
Screen Icons
Figure 4 – Screen Icons
1. Transformer Jaws
2. Jaw Trigger
3. Rotary Function switch
4. Data hold pushbutton
5. Mode pushbutton
6. Peak hold pushbutton
7. Backlight pushbutton
8. DC amps zero adjustment pushbutton
9. 4-Digit Liquid Crystal Display
10. Positive Input Terminal for DC/AC Voltage Measure-
ment, Resistance Measurement, Continuity Check,
Diode Test, Frequency Measurement, Capacitance
Measurement and Temperature Measurement
11. COM (Negative) Terminal for all measurements ( )
2
1
7
8
3
11
9
5
4
Icon Num b er Icons on Screen Description
1 AUTO Autoranging.
2 DC Amps Zero Adjustment.
3 DC Direct Current or Voltage.
4 AC Alternating Current or Voltage.
5 Low Battery.
6 — Polarity Indicator.
7 Analog Display of Voltage
8 °C and °F Temperature Mode (Degree Celsius, Degree Fahrenheit).
9 V, mV volts, millivolts
10 A amperes (amps), microamp, milliamp
11 Diode Test Mode.
12 Continuity Check Mode.
13
µ
F,
η
F, F, mF microfarad, nanofarad, farad, millifarad
14 kHz kilohertz
15
Ω
, k
Ω
, M
Ω
ohm, kilohm, Megohm
16 P MIN Peak Minimum Value.
17 P MAX Peak Maximum Value.
OL Overload Condition. (Shows in Numeric Display.)
5
8
13
1
14 15
17
3
4
10
6
12
9
11
16
2
10
6
7