4. 1/4” mounting thread screw: Used to mount the detector.
5. Round vial: indicates whether the base is vertical and level.
Using the Detector Mounting Base
With the detector mounting base, the detector can be secured to a vertical pillar with
flat sides at 90° angles.. The maximum width the base can accommodate is 3.7”.
1. Inert the 1/4” mounting thread screw into the 1/4” mounting hole at the back of the
detector; tighten the screw to securely attach the detector (Fig. 21).
2. Press the two release buttons at the same time to slide the quick clamp and fit it
onto the vertical pillar (Fig. 22)
Fig. 21
