Calibration-Z Axis
Keep the Green Auto Leveling Rotary Laser Level in the current position, power
off the level.
1. Turn on the level and the remote control;. Press the
and
button on the remote control at the same time to enter calibration mode (Fig.
33a).
2. Use
button to select “Zad” (Fig. 36a); press the
button to access
the Z axis for calibration (Fig. 36b).
3. Press the
button on the remote control to rotate the laser beam
counterclockwise, or press the
button on the remote control to rotate
the laser beam clockwise into alignment with your plumb line. For example,
Fig. 36b
Fig. 35
Fig. 36a
