Drop Ceiling Applications
1. Attach the wall mounting base to the wall with screws or nails or clamp onto a
horizontal stud. make sure the hanging trough of the base approximate to the level
of ceiling grid.
2. Secure the Green Auto Leveling Rotary Laser Level on the wall mounting base;
adjust the balance screw to ensure that the platform is approximately level.
3. Turn on the level; allow the laser to self-level.
4. Raise or lower the laser on the Wall Mounting Base until the rotating beam is at
the same level as the perimeter ceiling grid. Use the line created by the laser as a
reference to attach the perimeter grid to the wall.
5. Attach the magnetic laser target to the ceiling trim being installed. Adjust the
height of the trim until the laser beam strikes the target, as Fig. 29 shown.
