Ridgeway Grandfather, Instruction Manual

Page: 14 / 40

13
NON-WARRANTY REPAIR SERVICE
Charges will result for repair services if a sales receipt or other comparable proof of original purchase is not provided, if instructions were not
followed, if the product is beyond the Limited Warranty period or is otherwise outside the scope of the Limited Warranty
.
MINOR ADJUSTMENTS NOT COVERED UNDER WARRANTY
The following minor adjustments are not covered under this warranty. Repair service and/or parts to correct these adjustments are at the
consumer’s expense.
1. “ Set-Up ”. Set-Up instructions have been provided with your product.
2. Mechanical Movement Oiling and Cleaning. The movement in your clock is a mechanical mechanism and, therefore, requires periodic
oiling and cleaning depending on climatic and environmental conditions. Under normal conditions a movement requires oiling with high
quality clock oil approximately every two years from the date of purchase. Please contact a qualified clock repair person or
Authorized Service Center for this service.
3. Replacement of Suspension Spring . Replacement instructions have been provided with your product. Please return broken suspension
spring to us for proper identification and replacement.
4. Pendulum, Timing, and Chime/Strike Hammer Adjustments . Instructions for these adjustments have been provided in this publication
.
FREIGHT DAMAGE NOT COVERED UNDER WARRANTY
It is the responsibility of the consignee to claim any freight loss or damage directly with the carrier. If the carton indicates signs of “visible
damage”, instruct the driver to note the damage on the freight bill. If the carton contains “concealed damage”, notify the carrier and request
in writing within 14 days of product receipt a carrier inspection and damage report. Failure to notify the carrier within 14 days of product
receipt may waive your rights to a damage claim.
IMPORTANT SAFETY INSTRUCTIONS
for U.L. Electrical Furnishings
Read all instructions before using this product.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, basic precautions should always be followed when using electrical
furnishings, including the following:
a) Unplug from outlet before cleaning or pulling on parts or taking off parts.
b) Close supervision is required when this furnishings is used by or near children, handicapped or disabled persons.
c) Use this furnishing only for its intended use as described in its instructions. Do not use attachments not recommended by the manufacturer.
d) Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into
water. Return the furnishing to a service center for examination and repair.
e) Keep cord away from heated surfaces.
f) Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
g) Never drop or insert any object into any opening.
h) Do not use outdoors.
i) Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
j) To disconnect, turn all controls to the off position, then remove plug from outlet.
k) For grounded products - connect this furnishing to a properly grounded outlet only.
l) For loading - always put heavier items at the bottom and not near the top in order to help prevent the possibility of the furnishing tipping over.
WARNING - Risk of injury to Persons - do not use this furnishing to support video equipment such as televisions or computer monitors.
SAVE THESE INSTRUCTIONS