For the most up to date documents, bike models, additional information, instructional videos,
And more visit us at
Ride1UP.com
19
8. LCD Display Instructions:
8.1 Power On/Off
Press the POWER button to turn on. Press and hold the POWER button for 3 seconds to turn off. The Display
automatically shuts down when the bike is not used for 10 minutes.
•
It is best practice for safety, to only turn on your electric bike once you have lifted your leg over
the bike and are straddling the frame. You should turn it on before you begin riding, but only once
you are ready to ride.
•
It is also best practice for safety to turn off the bike when you are done riding after you dismount
from the seat, but before you lift your leg over the bike to get off. If you stop to look at something
or talk with someone, please turn off your bike for safety.
•
Once the bike is powered on, the throttle is active, if pushed it will cause the bike to accelerate. If
PAS is on and at 1 or higher, if the pedals are bumped and move forward when next to or moving the
bike, power will be sent to the motor and the bike will accelerate.
•
Turning it on and off as described above will minimize the chance of the bike accelerating
unintentionally.
8.2 Pedal Assist System (PAS) Level Operating
The assist level ranges from Level “0” to Level “5”. Level “1” is the minimum power and Level “5” is the
maximum. To change the assist level, press the MINUS (-) or PLUS (+) buttons until desired level is displayed
in the top right corner.
