Ridder LogicLink RLL400, Product Manual

Page: 2 / 32

TABLE OF CONTENTS
1. GUIDELINES, STANDARDS AND CONDITIONS
1.1 Applicable guidelines and standards 3
1.2 Approved personnel 3
1.3 Warning about discouraged use 3
1.4 Warranty provisions 3
2. SAFETY, PRECAUTIONS AND SYMBOLS
2.1 Signal words, instructions and warnings 4
2.2 Precautions and safety instructions 4
2.3 Residual risks 6
2.4 Symbols and abbreviations 6
3. PRODUCT DETAILS
3.1 Identification 7
3.2 Description 8
3.3 Application 8
3.4 Dimensions 9
3.5 Technical specifications 10
4. INSTALL INSTRUCTIONS
4.1 Special tools and equipment 12
4.2 Installation 13
5. CONNECT INSTRUCTIONS
5.1 Electrical material 13
5.2 Protection - Conditions and starting points 14
5.3 Overview and function diagram 15
5.4 Wiring diagram: Control board (RCB) 15
5.5 3-phase electric motor (208-600 VAC) 16
5.6 1-phase 3-wire electric motor (115-230 VAC) 17
5.7 1-phase 5-wire electric motor (115-230 VAC) 17
5.8 Automatic control (ACS) (24 V AC/DC) 18
5.9 OPTIONAL - Manual control (MC) 18
5.10 OPTIONAL - Position Feedback (RPU) 19
5.11 OPTIONAL - Alarm (AL) 20
6. USER INSTRUCTIONS
6.1 Usage - Conditions and starting points 21
6.2 Status LEDs 21
6.3 Operation 22
6.4 Alarm 23
6.5 Safety functions and stop functions 23
7. COMMISSIONING INSTRUCTIONS
7.1 Commissioning - Conditions and starting points 24
7.2 Check: Control direction of the Automatic Control (ACS) 25
7.3 Check: Control direction of the Manual Control (MC) 26
8. MAINTENANCE INSTRUCTIONS
8.1 Maintenance 27
9. SERVICE
9.1 Troubleshooting 27
9.2 Blink codes 28
9.3 Technical support 29
10. ENVIRONMENT
10.1 Decommissioning and removal 30
10.2 Waste disposal 31
Ridder Drive Systems B.V.
T
+31 (0)341 416 854 -
F
+31 (0)341 416 611 -
I
ridder.com
2