2. SAFETY, PRECAUTIONS AND SYMBOLS
2.1 Signal words, instructions and warnings
Signal words (ISO 3864-2)
This product manual contains safety instructions with different signal words. The list that follows
gives the risk levels and possible effects of each signal word.
Instructions and warnings on the product
Read the product manual to fully know all product properties,
before it is used or work starts!
Ê
It is not permitted to use high-pressure cleaners (and related
cleaning agents)! Use a soft brush with a small quantity of water
without cleaning agents.
Warning - Electrical voltage
After installation interchange the plug in the highest position
with the vent plug! Refer to the permitted mounting positions in
the product manual.*
*
Not applicable to the RW45 motor gearbox!
2.2 Precautions and safety instructions
Precautions
GENERAL
A system can be dangerous. Safety precautions and instructions are important.
•
If these precautions cannot be obeyed, then use warnings.
Suggestion to perform an operation more effective.
May result in damage or problems if an action is performed
incorrectly.
May result in minor injury if the hazard is not avoided.
Significant injury, possible death, if the hazard is not avoided.
Severe injury and possible death if the hazard is not avoided.
Ridder Drive Systems B.V.
T
+31 (0)341 416 854 -
F
+31 (0)341 416 611 -
I
4
Summary of Contents for LogicLink RLL400
Page 32: ......
