5.8 Automatic control (ACS) (24 V AC/DC)
You can connect the RLL400 control-unit to an automatic control system (ACS). Refer to the diagram
that follows and connect the ACS. Also refer to the product manual of the ACS that is used.
Notes:
•
When the two inputs of the digital control (pin 1 and 3) receive a control signal at the same time,
the control unit will not process them. The electric motor does not move.
•
The external power supply can be 24 V AC/DC.
•
Refer to §3.5 for the technical specifications of the external power supply of connector X6.
Connector X6 of the control board (A2) can be connected to
automatic control systems (ACS) that have a “switched ground” or a
“switched positive”.
5.9 OPTIONAL - Manual control (MC)
You can connect the RLL400 control-unit to a manual control (MC) such as the Ridder MC Module
Compact (277950).
•
Remove the jumper from connection 1 and 3 of X8.
•
Connect the manual control (MC). Refer to the diagram that follows.
Refer to the related manual when you connect a different manual control (MC).
Control board A2
Control board A2
YES
NO
MC
Ridder Drive Systems B.V.
T
+31 (0)341 416 854 -
F
+31 (0)341 416 611 -
I
18
Summary of Contents for LogicLink RLL400
Page 32: ......
