Ricon Aficio 551 Copy Reference Manual Download Page 251

Page: 251 / 372

Using Connect Copy

235

Note

❒

When the master unit “Auto Reset Timer” of the User Tools delay elapses, the
master unit will be reset automatically.

❒

When the sub-unit “System Reset” of the User Tools (System Settings) delay
elapses, Interrupt mode will be cancelled on the sub-unit.

Reference

See “Auto Reset Timer” in

⇒

P.310

“General Features

”

See “System Reset” in the System Settings manual.

Auto Off

The machine turns itself off automatically a certain period of time after your job
has finished. This function is called “Auto Off”.

Note

❒

You can change the Auto Off time.

Reference

See “Auto Off Timer” in the System Settings manual.

Exiting Connect Copy Mode

This procedure describes how to exit Connect Copy mode and return to the stan-
dard copying functions.

Press the

[Connect]

key on the master unit.

The

[Connect]

key will be deselected.

Note

❒

Settings that were selected on the master unit while in Connect Copy mode
will not be cleared.

Summary of Contents for Aficio 551




















































































































































































































































































































































































Search results

Summary of Contents for Aficio 551

Reviews:

Related manuals for Aficio 551

Brands by name

Popular brands

Ricon Aficio 551, Copy Reference Manual

Search results

Summary of Contents for Aficio 551

Reviews:

Related manuals for Aficio 551

Brands by name

Popular brands