Ricon Aficio 551 Copy Reference Manual Download Page 246

Page: 246 / 372

Connect Copy (Option)

230

Using Connect Copy

You can select Connect Copy mode from either of the two connected machines
by pressing the

[Connect]

key. The machine you use becomes the master unit,

and the other machine the sub-unit.

Limitation

❒

Once Connect Copy is selected, you must carry out all operations on the mas-
ter unit.

Note

❒

You can select whether the

[Connect]

key is displayed or not with the User

Tools. See “Connect Copy Master” in

⇒

P.331

“Count Manager”

Make sure that the machine is in Copy mode.

Note

❒

If the User Codes are turned on, enter a user code programmed in the mas-
ter unit using the number keys (maximum 8 digits) then press the

[#]

key.

You do not need to enter the user code for the sub-unit.

Reference

⇒

P.90

“User Codes”

Press the

[Connect]

key on the machine that is to be the master unit.

When the key darkens, the two units are connected.

❖

Master unit display

Summary of Contents for Aficio 551




















































































































































































































































































































































































Search results

Summary of Contents for Aficio 551

Reviews:

Related manuals for Aficio 551

Brands by name

Popular brands

Ricon Aficio 551, Copy Reference Manual

Search results

Summary of Contents for Aficio 551

Reviews:

Related manuals for Aficio 551

Brands by name

Popular brands