Ricon Aficio 551, Copy Reference Manual

Page: 249 / 372

Using Connect Copy
233
4
If you use Batch (SADF) mode
A
Set your originals and press the
{
Start
}
key. After all the previously set
originals are fed, set the next originals while the Auto Feed indicator is
lit.
B
When all pages have been scanned in, press the
{
#
}
key. Copying starts
simultaneously in the master and sub-unit.
Note
❒
To stop originals from being scanned or copied, press the
{
Clear/Stop
}
key on the master unit, then press the [Cancel] key following the instruc-
tions on the display.
Reference
See
⇒
P.36 “Batch (SADF) mode” .
If the size of scanned data exceeds memory capacity, the memory over-
flow message is displayed. Follow the instructions in “When Memory
Is Full”. See
⇒
P.262
“Connect Copy”
.
G
Pick up your copies from the master unit and sub-unit.
Note
❒
The number of sheets and sets copied by the master unit and sub-unit may
be different.
❒
The master unit and sub-unit may not finish copying at the same time.
❒
When using the Sort/Staple function, copies are organized into copy sets.
If there is a paper jam in one machine during this process, it is not possible
for the other machine to take over the copy set processing of the down ma-
chine.
-
Copy output order
❖
When copying in Sort/Staple mode
e.g., copying 6-sets of a 3-sheet original
• Copying with the master unit (face down output)—sub-unit (face down
output)