Ricon Aficio 551 Copy Reference Manual Download Page 247

Page: 247 / 372

Using Connect Copy

231

❖

Sub-unit display

Reference

If the

[Connect]

key is not visible or you cannot select it, see

⇒

P.252

“Con-

nect Copy”

If you press the

[Connect]

key and the message “Connect Copy is not avail-

able at this time. Please check the connected machine. Press

[Cancel]

, con-

nect copy will be cancelled.” appears, see

⇒

P.249

“Connect Copy”

Set your originals in the master unit.

Reference

⇒

P.31

“Setting Originals”

Make any settings you require on the master unit.

Summary of Contents for Aficio 551




















































































































































































































































































































































































Search results

Summary of Contents for Aficio 551

Reviews:

Related manuals for Aficio 551

Brands by name

Popular brands

Ricon Aficio 551, Copy Reference Manual

Search results

Summary of Contents for Aficio 551

Reviews:

Related manuals for Aficio 551

Brands by name

Popular brands