Ricon Aficio 551 Copy Reference Manual Download Page 172

Page: 172 / 372

Copying

156

Designate

Use this function to have certain pages of your original copied onto slip sheets.

Preparation

Before using this function, set the special paper tray for slip sheets. See “Slip
Sheet 1”, “Slip Sheet 2” in the System Settings manual.

Limitation

❒

You cannot use this function with Slip Sheet mode.

Note

❒

You can specify the pages up to 20.

❒

When Combine mode (“1 Sided

→

2 Sided”) has been selected, the page num-

bers you designate will always be copied onto the front of copies in the same
way as Chapters mode.

Press the

[Cover/Slip Sheet]

key.

Summary of Contents for Aficio 551




















































































































































































































































































































































































Search results

Summary of Contents for Aficio 551

Reviews:

Related manuals for Aficio 551

Brands by name

Popular brands

Ricon Aficio 551, Copy Reference Manual

Search results

Summary of Contents for Aficio 551

Reviews:

Related manuals for Aficio 551

Brands by name

Popular brands