Ricon Aficio 551 Copy Reference Manual Download Page 207

Page: 207 / 372

Stamp

191

To program the User Stamp

Press the

[Program]

key.

Press the stamp number (1 – 4) you want to program.

Note

❒

Stamp numbers with

already have settings in them.

❒

If the stamp number is already being used, the machine will ask you if
you wish to overwrite it — Press the

[Yes]

[No]

key.

Enter the user stamp name with the letter keys on the display panel.

Note

❒

You can register up to 8 characters.

❒

To change the name entered, press the

[Back Space]

[Clear]

{

Clear/

Stop

}

key and enter new letters.

Press the

[OK]

key.

Summary of Contents for Aficio 551




















































































































































































































































































































































































Search results

Summary of Contents for Aficio 551

Reviews:

Related manuals for Aficio 551

Brands by name

Popular brands

Ricon Aficio 551, Copy Reference Manual

Search results

Summary of Contents for Aficio 551

Reviews:

Related manuals for Aficio 551

Brands by name

Popular brands