2.Replacement and Adjustment
92
Notes on Reattaching the Stapler Unit
When you reattach the stapler unit or if you have removed the harness connected to the stapler unit or
released its clamp, route and secure the harness as follows.
If the harness is not routed or secured correctly, it may interfere with the operation of the stapler unit or
may become damaged or broken.
•
For details about routing the harness on the Main Controller Board (PCB1), refer to "
Harness Routing During Reattachment
Routing Harness Around Unit
Route the harness so that the cable tie [A] is located to the right of the clamp [B].
Inside the Machine’s Frame
•
Secure with the clamp the part of the harness between the 2 cable ties.
•
Route the harness through the edge saddle [C] and secure it over the shortest distance, and then
route it through the hole [D] and pull it out to the main board side.
