1.Detailed Descriptions
37
Stapling is done by engaging the pressure cam [D] to stretch the pressure link [A], which applies
pressure between to the upper tooth [C] and the lower tooth [B]. Moving and stapling operation for the
stapler are driven by the stapler drive motor. The home position is detected by the Stapleless Stapler
HP Sensor (S39).
•
Double/Single
The bond strength depends on the degree of entwining of fibers between sheets of the paper
bundle. Setting to Single or Double stapling allows you change the bond strength.
Single applies one staple operation.
Double applies one more, with the same operation as the first staple, at 4mm from the first. The
Stapleless Stapler Drive Motor (DCM9) moves the paper after the first stapling.
•
Bundle ejection
After stapling, the trailing edge presser is released. The bundle of paper is ejected by the
paper output roller.
Stapler movement mechanism
This stapler needs to staple twice for a single staple position, and must be moved to do this stapling.
If the cam [A] rotates, it pushes against the securing pin [D], changing the stapling position.