Ricoh SR3260 Field Service Manual Download

Page: 3 / 128

Symbols, Abbreviations and Trademarks

Symbols, Abbreviations

This manual uses several symbols and abbreviations. The meaning of those symbols and abbreviations

are as follows:

Symbol

What it means

Clip ring

Screw

Connector

Clamp

E-ring

Flat Flexible Cable

Timing Belt

SEF

Short Edge Feed

LEF

Long Edge Feed

Black

Cyan

Magenta

Yellow

B/W, BW

Black and White

Full color

[A] Short Edge Feed (SEF)

[B] Long Edge Feed (LEF)

Trademarks

Adobe, Acrobat, PageMaker, PostScript, and PostScript 3 are either registered trademarks or

trademarks of Adobe Systems Incorporated in the United States and/or other countries.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any

use of such marks by Ricoh Company, Ltd. is under license.

Firefox and Thunderbird are registered trademarks of the Mozilla Foundation.

Summary of Contents for SR3260

































































































































Search results

Summary of Contents for SR3260

Reviews:

Related manuals for SR3260

Brands by name

Popular brands

Ricoh SR3260, Field Service Manual

Search results

Summary of Contents for SR3260

Reviews:

Related manuals for SR3260

Brands by name

Popular brands