1.Detailed Descriptions
25
Binding modes: Edge binding mode (one position)/edge binding mode (two positions), and booklet
stitch mode (small sizes: B5, A4, LT)
Lower trailing edge fence
When the stapler moves to the center, the trailing edge fence is depressed by hitting the stapler.
Binding modes: booklet stitch mode (large sizes: LG, B4, A3, DLT, 12"×17.7")
Jogger operation
After the paper rear edges have been aligned by stacking, jogger operation is then performed to align
the width.
The jogger fences [B] are opened and closed by the Jogger Motor (STM3) [A]. At the start of jogging,
the jogger fences [B] stand by in a state where they are opened wider than the paper width.
When the rear edge of the transported paper is pressed against the trailing edge fence by the reverse
roller, the jogger fences move close to the edges of the paper.
Next, the jogger fences move to the edges, to align the paper.
After jogging is complete, the jogger fences again open, and stand by to receive the next sheet.
