2.Replacement and Adjustment
101
11.
Remove the stapler unit (clincher side) [A] (
×3,
×2).
12.
Disconnect three connectors and release four clamps on the stapler unit (driver side).
13.
Remove the stapler unit (driver side) [A] (
×3, ×4).
14.
Attach the special tool* to the stapler unit to adjust the staple position of the stapler unit.
Check that four pins ([A] and [B]) on the special tool are fixed in the slots [C] on the stapler unit as
shown below.
[A]: Two pins for driver
