Ricoh SP 3710DN User Manual Download

Page: 32 / 208

After extension, check that the arrows on the extender and tray are aligned.

DYG242

Follow Steps 2 to 6 in

page 26 "Loading Paper into Tray1 and 2"

• To reinsert the extender, you might have to push it with moderate force.

Loading Paper into Bypass Tray

• Before printing on paper other than envelopes, make sure to pull up the levers on the machine rear,

inside the rear cover. Leaving the levers lowered can cause print quality problems when printing on
paper other than envelopes.

• Do not load paper while the machine is printing.
• Load paper with the print side up and in the short-edge feed direction.
• Curled paper may jam. Straighten curled paper before loading.

Open the bypass tray.

If you load A4 (297 mm) or larger size paper, pull out the bypass tray extension.

DYG246

2. Paper Specifications and Adding Paper

Summary of Contents for SP 3710DN

















































































































































































































Search results

Summary of Contents for SP 3710DN

Reviews:

Related manuals for SP 3710DN

Brands by name

Popular brands

Ricoh SP 3710DN, User Manual

Search results

Summary of Contents for SP 3710DN

Reviews:

Related manuals for SP 3710DN

Brands by name

Popular brands