Ricoh SP 330SFN Page 264 Service Manual Download

Page: 264 / 333

Laser Exposure

M0C3/M0C4/M0C5/M0C6/M0C7

7-22

7.6.2 MECHANISM

Synchronization Detector

The mirror reflects the beam from the LD unit to the synchronization detector.

Automatic Power Control (APC)

The LD driver on the LD drive board automatically controls power for the laser diodes. The laser

diode power is adjusted at the factory.

LD Safety Mechanisms

Laser Safety Switch:

There are safety switches on the front and rear covers. These switches

stop the laser while the cover is open. If the user opens one of these covers, the +5VLD power

to the laser diodes is stopped.

Summary of Contents for SP 330SFN














































































































































































































































































































































Search results

Summary of Contents for SP 330SFN

Reviews:

Related manuals for SP 330SFN

Brands by name

Popular brands

Ricoh SP 330SFN, Service Manual

Search results

Summary of Contents for SP 330SFN

Reviews:

Related manuals for SP 330SFN

Brands by name

Popular brands