Ricoh SP 330SFN, Service Manual

Page: 224 / 333

Error Messages
M0C3/M0C4/M0C5/M0C6/M0C7 6-16 SM
Message Causes Solutions
machine.
Memory Overflow
The number of fax jobs in
memory (unsent or unprinted
faxes) has reached
maximum, so new jobs
cannot be stored.
Wait until pending jobs have been
transmitted or printed.
Memory Overflow The data is too large or
complex to print.
•
Select [600 × 600 dpi] in
[Resolution] under [Printer
Features] to reduce the size of
the data.
•
If using the PCL6 printer driver,
set [Resolution] in the Print
Quality tab to [600 × 600 dpi].
Memory Overflow
•
The machine's memory
reached capacity while
scanning the first page
of the original to store a
fax job in memory before
transmission.
•
The machine's memory
reached capacity while
storing a fax in memory
in Memory Transmission
mode.
Resend the fax in parts as several
smaller individual faxes, or send at a
lower resolution.
Memory Overflow TX
Cancel
Memory has reached
capacity while scanning the
second or later pages of the
original when trying to send a
fax in Memory Transmission
mode.
Press [TX] to send only the pages
that have been scanned in memory,
or press [Cancel] to cancel.
Misfeed: BypassTray Paper has jammed in the
bypass tray.
Remove the jammed paper.
Misfeed: Duplex Unit
Remove Paper
Only when using the touch
panel models.
Paper has jammed in the
Remove the jammed paper.