Ricoh SP 330SFN, Service Manual

Page: 226 / 333

Error Messages
M0C3/M0C4/M0C5/M0C6/M0C7 6-18 SM
Message Causes Solutions
The print cartridge is almost
empty.
Replace Required Soon:
Print Cartridge
Only when using the four-line
LCD models.
The print cartridge is almost
empty.
Out of Toner: Black
Only when using the touch
panel models.
The machine has run out of
toner.
Replace the print cartridge.
Replacement Required:
Print Cartridge
Only when using the four-line
LCD models.
The machine has run out of
toner.
Replacement Required:
Paper Feed Roller
The paper feed roller is no
longer usable, and must be
replaced.
Replace the paper feed roller.
RX Communication Error A reception error occurred,
and the fax could not be
received correctly.
If possible, contact the sender of the
fax and ask them to resend it.
Scan (NW) Disconnected A scanned file could not be
sent because the Ethernet
cable was not connected
properly.
Reconnect the Ethernet cable
properly, and then try the operation
again.
Scan (USB)
Disconnected
The USB cable was
disconnected while scanning
from a computer.
Reconnect the USB cable properly,
and then try the operation again.
Server Connection Failed A scanned file could not be
sent because the destination
could not be reached.
Confirm that the destination is
registered correctly, and then try the
operation again.
Server Response Error An error occurred in
communication with the
server before beginning
transmission.
Confirm that the destination is
registered correctly, and then try the
operation again.
If the problem could not be solved,