Ricoh SP 330SFN, Service Manual, Page: 143 / 333

Maintenance Mode (for Four-line LCD Models)
SM 5-9 M0C3/M0C4/M0C5/M0C6/M0C7
S
yst
em
Mai
n
ten
an
c
e
Menu Description
[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]
Flatbed Main Reg. Adjusts the Flatbed Scan main-scan magnification.
[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]
Flatbed Sub Reg. Adjusts the Flatbed Scan sub-scan magnification.
[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]
Factory Default
Menu Description
Factory
Default
Return Does not execute anything. Returns to an upper level.
Execute Resets all the settings to factory default.
Clears/ resets the contents of the controller memory (all data
programmed by the user, log data application counters) to factory default.
After executing, initial setup menu starts after power-on.
CTL Maintenance
Menu Description
PDL Mode
ON = "PDL Settings" is shown in [Print List/Report] menu (Default)
OFF = "PDL Settings" is hidden
FW Update
Mode
If updating firmware on a machine in which LDAP authentication is set, execute this
mode.
[Execute/ Return]
After pressing “Execute”, the display shows “Please Restart Machine….” Turn the
machine's main power off, and then on. Then the machine activates in a special
boot loader mode. After that, update the firmware via USB cable.
Auto IP
ON = Automatically set an IP address when an IP address cannot be acquired
(Default)
OFF = Continually try to obtain an IP address by DHCP
Disable
USB Port
Sets whether the USB port function is valid or invalid
[Off (Default)/On]
Paas
Validity
Setting
When used to set Paas (Only for CHN)
[Inactive (Default)/ Active]