Ricoh SP 330SFN, Service Manual

Page: 195 / 333

Reports
SM 5-61 M0C3/M0C4/M0C5/M0C6/M0C7
S
yst
em
Mai
n
ten
an
c
e
To Print the Test Pattern
For information on how to enter the "Maintenance Mode (SP mode)", contact the supervisor in
your branch office.
For Four-Line LCD Models
1. Enter the "Maintenance Mode (SP mode)".
2. Press the [ ] or [ ] key to select [Engine Maintenance], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Test Pattern], and then press the [OK] key.
The three test pattern pages are printed.
For Touch Panel Models
1. Enter the "Maintenance Mode (SP mode)".
2. Press [Engine Service Setting].
3. Press [Test Pattern].
The three test pattern pages are printed.
Test Pattern Examples