manualshive.com logo in svg

Ricoh SP 100SF, User Manual, Page: 93 / 140

Share
Download
Ricoh SP 100SF User Manual Download Page 93

Printer Features Settings

I/O Timeout

Timeout: USB

Specifies how many seconds the machine waits for print data and if the data is interrupted
while being sent from the computer via USB. If the machine does not receive any data within
the specified time, the machine only prints the data it has received.
Default: 60 sec.

• Off
• 15 sec.
• 60 sec.
• 300 sec.

Auto Continue

Sets the machine to ignore errors on paper size or type and continue printing. The printing stops
temporarily if an error is detected, and resumes automatically after about ten seconds, depending
on the settings specified in the control panel.
Default: [Off]

• On
• Off

Sub Paper Size

Sets the machine to print onto paper of another size if the specified paper is not loaded in tray.
Alternative sizes are preset to A4 and Letter.
Default: [Off]

• On
• Off

Printer Features Settings

91

Summary of Contents for SP 100SF













































































































































Reviews:

No comments