Ricoh SP 100SF, User Manual, Page: 119 / 140

Problem Solution
Cannot print received faxes.
• The input tray is empty. Load paper in the input tray. See
p.20 "Loading Paper".
• The input tray does not contain paper of the right size.
Load paper of the right size in the input tray.
Faxes you sent appear spotty or
dirty when received.
• The exposure glass or ADF is dirty. See p.102 "Cleaning
the Auto Document Feeder".
• Before placing originals on the exposure glass, make
sure that ink or correction fluid is dry.
A fax you sent appears blank when
received. The original was placed upside down. Place the original in the
correct orientation. See p.25 "Placing Originals".
Dirty spots may appear, or an image
from the reverse side shows through
copy received by the recipient.
Image density is too high. Adjust the image density.
Dial fails when trying to send faxes.
Confirm the error code, and then perform the appropriate
procedure to resolve the problem.
Fax Problems
117