T
echnical
B
ulletin
PAGE: 1/4
Model:
Shepherd-P1
Date:
16-Nov-18
No.:
RJ093007
Subject: Check the main ink tank tube condition
Prepared by:
Y.Kurohashi
From:
1st System Business Promotion Section, System
Business Department
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other (
)
Action required
Service manual revision
Retrofit information
Tier 2
At machine installation:
Outline
Make sure that main ink tank tube is located correct position before ink filling.
1. Whether the edge of the tube is placed lower position than ink end sensor.
2. Whether the ink supply tube is straight.
[2. Installation] [Filling the Ink Tanks with Ink]
Check procedure
1. Check the points from ink filling port after removing caps.
2. Straighten out the kink of tube, or cut it to the correct length, or replace it with
correct length one.
Pull the main ink tanks out if it is difficult to recognize visually.
The ink supply tube is
straight and its edge
is lower than ink end
sensor.
Ink end sensor
