T
echnical
B
ulletin
PAGE: 1/2
Model:
Shepherd-P1
Date:
11-Jan-18
No.:
RJ093010
Subject: Additional caution when installing the ink
supply pump
Prepared by:
Y.Kurohashi
From:
1st System Business Promotion Section, System
Business Department
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other (
)
Action required
Service manual revision
Retrofit information
Tier 2
Service Manual Revision
[4. Replacement and Adjustment] – [Ink Supply Unit] - [Ink Supply Pump] -
[When Installing the Ink Supply Pump]
When Installing the Ink Supply Pump
When installing the new ink supply pump, make two tubes (7cm long × 1, 10cm long × 1)
from the tube prepared in advance. Attach two tubes and two tube fittings to the new ink
supply pump, and then install them in the machine as shown below.
No.
Description
No.
Description
[A]
New ink supply pump
[D]
Tube fitting
[B]
Tube (7cm)
[E]
Tube fitting
[C]
Tube (30cm)
When installing the ink supply pump, make sure to connect the one-touch coupling.
When installing the ink supply pump, assemble the pump, fitting and tube before attached
to the printer frame like the photo below.
