Ricoh SH-P1 M020, Field Service Manual

Page: 200 / 312

5870
Common KeyInfo Writing
Writes to flash ROM the common proof for validating the device for @Remote
specifications.
• These SP settings are required to connect @Remote or must also be set after the
board is replaced.
• Even if @Remote is not connected, these settings are used for Web validation, so
at least SP5-870-003 must be enabled.
5870 001 Writing
Writes the authentication data (used for NRS) in the
memory.
5870 003 Initialize Initializes the authentication data in the memory.
5873
SDCardAppliMove
Allows you to move applications from one SD card another. For more, please refer to
the "SD Card Application Move" section.
5873 001 MoveExec Executes the move from one SD card to another.
5873 002 UndoExec
This is an undo function. It cancels the previous
execution.
5878 Option Setup
5878 001 DataOverwriteSec.
Press [EXECUTE] to initialize the Data Overwrite
Security option for the printer. For more, see
"DataOverwriteSecurity Unit" in the chapter
"Installation".
5878 002 HDD Encryption
Press [EXECUTE] to initialize the HDD Encryption
option for the printer. For more, see "HDD Encryption"
in the chapter "Installation".
5887 SD GetCounter
5887 001 SD GetCounter
This SP outputs a text file ( .txt) that lists the counts for
the application SD card inserted into the SD service
slot. Before executing this SP, you must first create a
folder entitled "SD_COUNTER" in the root directory of
the SD card.
5. System Maintenance Reference
198
5