Ricoh SH-P1 M020, Field Service Manual

Page: 194 / 312

5856 Remote ROM Update
5856 002 Local Port
When set to "enable" allows reception of firmware
data via the local port (IEEE 1284) during a remote
ROM update.
0: Disallow
1: Allow
This setting is reset to "disable" after the machine is
cycled off and on.
5857 Debug Log Save
5857 001 ON/OFF
Switches on the debug log feature. The debug log
cannot be captured until this feature is switched on.
[0 to 1 / 0 / 1]
0: OFF
1: ON
5857 002 Target 2:HDD 3:SD
Selects the destination where the debugging
information generated by the event selected by
SP5858 will be stored if an error is generated
[2 to 3 / 2 / 1]
2: HDD
3: SD Card
5857 005 Save to HDD
Specifies the decimal key number of the log to be
written to the hard disk.
5857 006 Save to SD Card
Specifies the decimal key number of the log to be
written to the SD Card.
5857 009 HDD to SD Latest
Takes the most recent 4 MB of the log written to the
hard disk and copies them to the SD Card.
A unique file name is generated to avoid overwriting
existing file names on the SD Card. Up to 4MB can be
copied to an SD Card. 4 MB segments can be copied
one by one to each SD Card.
5. System Maintenance Reference
192
5