Ricoh RDC-I700, Operation Manual

Page: 96 / 186

94
Making a Backup/Restoring the Camera Settings
This section explains how to save all the information currently stored in the
camera (all information other than recorded images, motion pictures, voice
memo data, etc.) in the PC, and how to restore the backup information to the
camera.
Note
• This function can be used in the following cases.
• When you wish to save the camera settings in case of accident or
misoperation.
• When you want joint possession of the settings (in this case, first
save the settings, and then connect another camera and restore the
information to the other camera).
• When one camera is used by several people (in this case, each
person should make their own settings on the camera and save
them, and then the settings can be changed by the restore function
each time the camera is used by a different person).
Saving the Camera Settings in the PC
This function enables you to save all the camera settings, such as the Address
Book, JOB Navi., dial-up, direct upload and Quick Send, as files in the PC (on
the hard disk, etc.).
A
Check that the camera is properly connected to the PC, that the
camera and the PC are turned on, and that the camera’s mode dial
is set to [
].
B
Start up the browser by the PC, input the IP address and display
the camera’s homepage.
See
• P.28 “Opening the Camera’s Homepage on the Browser”
C
Click on [SAVE SETTING].
The dialog box for setting the location and file name will be displayed.