Ricoh RDC-I700 Page 95 Operation Manual Download

Page: 95 / 186

Changing the Camera Settings

Setting a Server for FTP Upload

This function enables you to set the FTP server for FTP upload, the account
and password for accessing the server, etc.

Display the list of dial-up accounts for FTP Upload.

See

• P.91 “Displaying the FTP Upload Dial-Up Accounts”

Click on [SEND TO].

The setup screen relating to the FTP server will be displayed.

Use the mouse and keyboard to edit the setting.

Note

• If you have not yet clicked on [UPDATE], you can return to the status

prior to setting (the status immediately after this screen was displayed)
by clicking on [PRE. SETTING].

When you have finished making the setting, click on [UPDATE].

Setting related to the FTP server is now completed.

Summary of Contents for RDC-I700



























































































































































































Search results

Summary of Contents for RDC-I700

Reviews:

Related manuals for RDC-I700

Brands by name

Popular brands

Ricoh RDC-I700, Operation Manual

Search results

Summary of Contents for RDC-I700

Reviews:

Related manuals for RDC-I700

Brands by name

Popular brands