manualshive.com logo in svg

Ricoh RDC-I700, Operation Manual, Page: 138 / 186

Share
Download
Ricoh RDC-I700 Operation Manual Download Page 138

136

Restoring the Backup Settings to the Camera

This function enables you to restore the camera backup settings saved on a PC
disk to the camera.

Important

Note

• When this function is executed, all the other current camera settings

are erased.

■

For Windows

A

Connect the camera correctly to the PC and set the camera’s
mode dial to [

]. Then turn the camera and the PC on.

B

Select [Windows Explorer] under [Programs] in the [Start] menu.

Explorer will start up.

C

Click on the [RDC-i700] icon with the right button and select
[Restore RDC-i700 setting...] from the menu displayed.

The dialog box for selecting the file for downloading will be displayed.

D

Select the file and then click on [Open].

The selected settings are now transferred to the camera.

E

Turn off the camera and turn it on again about 5 seconds later.

You can now use the camera with the transferred settings.

Note

• In this section, the explanation uses the method of clicking with the

right button, but the function can also be selected from the Explorer
[File] menu.

Summary of Contents for RDC-I700



























































































































































































Reviews:

No comments