Ricoh RDC-I700 Page 157 Operation Manual Download

Page: 157 / 186

155

Setting the Receiving PC for

Direct Upload

■

Using the RDC-i700 Direct Communication software

Start up [RDC-i700 Direct Upload].

[RDC-i700 Direct Upload] is installed in the root folder of the startup disk
immediately after installation.

If you wish to make a direct upload log file (a record of
connections and transmissions), set a folder and file name.

The images transferred from the camera will be saved in the folder specified as
the destination folder.
If you do not need a log file, leave the log file name blank.

Click on [OK].

Direct upload is in standby status.

To use direct upload from outside the company, before leaving the company do
not forget to put the Macintosh in this status.

Summary of Contents for RDC-I700



























































































































































































Search results

Summary of Contents for RDC-I700

Reviews:

Related manuals for RDC-I700

Brands by name

Popular brands

Ricoh RDC-I700, Operation Manual

Search results

Summary of Contents for RDC-I700

Reviews:

Related manuals for RDC-I700

Brands by name

Popular brands