Ricoh RDC-i500 Operation Manual Download Page 37

Page: 37 / 182

Viewing Images on a PC

■

Data Other Than Still Images

Perform the following procedure if you wish to display or play back data such as
text files, motion pictures or voice memos.

Important

Note

• The QuickTime plug-in software is needed to display and play back

data other than normal still images (text, motion pictures, voice memos
and non-compressed still images).

Click on the data icon you wish to check.

Click on the icon in the same way for FILE PROPERTY.

The plug-in software compatible with the selected data will automatically start
up and the data will be displayed or played back.

Note

• The screen shown below may be displayed, depending on the browser

settings. To open data such as text files, voice memos or motion
pictures, select [Open this file from its current location], and to make a
backup file, select [Save this file to disk].

Summary of Contents for RDC-i500























































































































































































Search results

Summary of Contents for RDC-i500

Reviews:

Related manuals for RDC-i500

Brands by name

Popular brands

Ricoh RDC-i500, Operation Manual

Search results

Summary of Contents for RDC-i500

Reviews:

Related manuals for RDC-i500

Brands by name

Popular brands