Ricoh RDC-i500 Operation Manual Download

Page: 39 / 182

Viewing Images on a PC

Note

• Still images can be saved in JPEG files. In the case of Windows,

however, you can also save images in BMP format. (Change the file
format by [File Type] in the dialog box.)

■

Data Other Than Still Images

[For Windows] Move the mouse pointer to the data (symbol) you
wish to save and click the right mouse button.
[For Macintosh] Move the mouse pointer to the data (symbol) you
wish to save and click while pressing the [control] key.

The menu will be displayed in the position of the mouse pointer.

Click on [Save Target As...].

If you are using Netscape Communicator, click on [Save Link As...].
The dialog box for specifying the location and file name will be displayed.

Specify the location and file name and then click on [Save].

If you are using Netscape Communicator, be sure to select the source under
[Save in].

The selected data will be saved in the PC.

Note

• Text files and non-compressed files are saved as TIFF files, motion

pictures as AVI files, and voice memos as WAV data.

Summary of Contents for RDC-i500























































































































































































Search results

Summary of Contents for RDC-i500

Reviews:

Related manuals for RDC-i500

Brands by name

Popular brands

Ricoh RDC-i500, Operation Manual

Search results

Summary of Contents for RDC-i500

Reviews:

Related manuals for RDC-i500

Brands by name

Popular brands