Ricoh PJ WUL6281, User Manual

Page: 9 / 95

English
7
English
Usage Notice
the power cord and consult your dealer or service
representative. Use of the power cord could result in
fi re or electric shock.
■
Warning- Do not use the connection cable if it is deformed,
cracked, or damaged. Doing so could result in
fi re or electric shock. If the connection cable is
deformed, cracked, or damaged, contact your service
representative to request a replacement cable.
■
Warning- When using an extension cord or power strip, only
connect equipment whose total power consumption
is within the power rating for the extension cord or
power strip. If the power rating is exceeded, it may
cause heat buildup and result in fi re.
■
Warning- Do not place the power cord and connection cable in
front of the lens or exhaust vents when the product is
turned on. Doing so may result in fi re.
■
Warning- Be sure to locate the machine as close as possible to a
wall outlet. This will allow easy disconnection of the
power cord in the event of an emergency.
■
Caution- Push the power plug all the way into the power outlet.
Do not use a power outlet with a loose connection.
Doing so may result in heat buildup. Plug the power
cord in the correct direction into the base. If they are
not plugged in correctly, it could result in smoke, fi re,
or electric shock.
■
Caution- If this machine is not going to be used for several days
or longer, disconnect its power cord from the wall
outlet.
■
Caution- When disconnecting the power cord from the wall
outlet, always pull the plug, not the cord. Pulling the
cord can damage the power cord. Use of damaged
power cords could result in fi re or electric shock.
■
Caution- Be sure to disconnect the plug from the wall outlet
and clean the prongs and the area around the prongs
at least once a year. Allowing dust to build up on the
plug constitutes a fi re hazard.
■
Caution- When performing maintenance on the machine, always
disconnect the power cord from the wall outlet.
■
Caution- Unplug the power cord from the wall outlet before you
move the machine. While moving the machine, take
care that the power cord is not damaged under the
machine. Failing to take these precautions could result
in fi re or electric shock.