Ricoh PJ WUL6281, User Manual

Page: 48 / 95

46
English
User Settings
Using the On Screen Display (OSD)
The Projector has a multilingual On Screen Display that
allows you to make image adjustments and change a variety of
settings.
How to operate
Follow the steps below to use the OSD menu to confi gure the
projector settings.
1. To open the OSD, press “Menu” on the Control Panel or Re-
mote Control.
2. When OSD is displayed, use keys to select any item in
the main menu. While making a selection on a particular page,
press or “Enter” key to enter sub menu.
3. Use keys to select the desired item in the sub menu and
press or “Enter” key to view further settings. Adjust the
settings by using key or key.
4. Select the next item to be adjusted in the sub menu and adjust
as described above.
5. Press “Enter”, and the screen will return to the previous menu.
6. Press “Menu” or
key to return to the main menu.
7. To exit, press “Menu” again. The OSD menu will close and
the projector will automatically save the new settings.

If no button
operation is made
for approximately 10
seconds, the OSD will
be closed automatically.
Note
Select
Enter
Exit
Sub Menu
Settings
Main Menu