Ricoh PJ WUL6281, User Manual, Page: 41 / 95

English
39
English
Basic Operations
Powering On/Off the Projector
Powering On the Projector
1. Ensure that the power cord and signal cable are securely con-
nected. The Power indicator will turn red.
2. Turn on the projector by pressing the button on the con-
trol panel or the button on the remote control. The Power
indicator will fl ash red.
The startup screen will display and the Power indicator will
turn blue.
3. Turn on your source (computer, notebook, video player, etc.)
The projector will detect your source automatically.
4. Make sure that the “Auto Source” has been set to “On”.
■
Warning- Do not look into the lens while the laser is on. The
strong light from the laser may cause permanent eye
injuries.
■
Warning- Do not block the air intake or exhaust. Doing so could
cause a fi re due to internal overheating.
■
Warning- Do not place your hands, face, or other objects near
the air exhaust, or the bottom of the unit. Doing so
could result in injury and/or damage the object.

If you connect
multiple sources at
the same time, press
“Input” on the control
panel or the source
button on the remote
control to switch
inputs.

Turn on the
projector fi rst and then
the signal sources.
Note
ON OFF
2 1 3
5 4 6
8 7 9
Gamma Bright Cont. PIP
0 Info Mode
Auto Input
Menu Exit
Hot Key AV Mute Pattern
Focus Lens H
Lens V
Keystone H
Keystone V
Zoom
Enter
OR