Ricoh PJ WUL6281, User Manual

Page: 66 / 95

64
English
User Settings
Network Standby
Set the projector’s standby mode.

On: Allow the user to monitor the projector through network
when the projector is standby.

Off: This mode has less power consumption which does not allow
the user to communicate with the standby peojector.
High Altitude
When “On” is selected, the fans will spin faster. Set this mode to “On”
when the projector is used over 5000ft (1500m) elevation.
Laser Settings
Use this menu to view the laser diode usage status and confi gure
the laser settings.

Laser Power Mode: Set the brightness and color mode.
• Constant Power: Set the projector’s power level to meet
different installation requirements for brightness.
• Contrast Intensity: After setting the Constant Power, select
Constant Intensity to maintain current brightness and color.
• ECO 1: 80% of the contant brightness and color settings.
• ECO 2: 50% of the contant brightness and color settings.

Constant Power: Use the or key to set the value for contant
power mode.