Ricoh Pentax 645Z, Operating Manual

Page: 21 / 172

1
19
The captured image and shooting information are displayed
in single image display of the playback mode.
Press G to change the type of information displayed in single
image display. Use CD to select the type and press E .
Press d to switch between the memory cards inserted in the two
slots, SD1 and SD2.
The display selected in the Playback Info Display selection screen
appears in playback mode when the camera is turned off and on
again. If [Playback Info Display] is set to off in [Memory] of the
A
4
menu, the [Standard Information Display] always appears first
when the camera is turned on. (
w
p.R22)
You can display the grid with [Grid Display] of the
B
1 menu. (
w
p.R26)
You can set the camera so that the bright (overexposed) areas in the
image blink red with [Highlight Alert] of the
B
1 menu. (
w
p.R26)
Captured image, file format, exposure
parameters, and operation guide indicators are
displayed.
Detailed information on how and when the image
was taken is displayed (p.20).
Captured image and brightness histogram are
displayed (p.21).
Not available during movie playback.
Captured image and RGB histogram are
displayed (p.21).
Not available during movie playback.
Only the captured image is displayed.
1/
2000
1/
2000 F2.8 F2.8 200 200 +0.3 +0.3
100-0001 100-0001
1/ 2000 1/ 2000 F2.8 F2.8 200 200 +0.3 +0.3
100-0001 100-0001
Standard Information Display Standard Information Display
Single image display
(Standard Information Display)
Playback Info Display
selection screen