Ricoh Pentax 645Z, Operating Manual

Page: 137 / 172

R23
A
The settings saved as the USER mode can be displayed on
the monitor when you select [Check Saved Settings] in Step 3.
To reset the settings to the default values, select [Reset USER
Mode] in Step 3.
You can change the name of the USER mode in which you
saved settings.
1
D .
The [Rename USER Mode] screen appears.
2 D .
The text-entry screen appears.
3
Up to 18 single-byte alphanumeric
characters and symbols can be
entered.
4
E .
The [Rename USER Mode] screen reappears.
1
O P
or
Q
.
The USER mode guide is displayed for
30 seconds.
Use
AB to check the saved settings.
2
The exposure mode can be changed in
[Exposure Mode] of the
A
1 menu.
The settings changed in Step 2 are not saved as the USER mode
settings. When the camera is turned off, the settings return to the
originally saved ones. To change the original settings, save the
USER mode settings again.
ABCD
Moves the text selection cursor.
R
Moves the text input cursor.
J
Switches between upper and lower case letters.
E
Enters a character selected with the text selection
cursor at the position of the text input cursor.
L
Deletes a character at the position of the text input cursor.
Cancel Cancel
Delete One Character Delete One Character
Enter Enter
Finish Finish
Rename USER Mode Rename USER Mode
Text selection cursor
Text input cursor
ABCDEFGHIJKLMNOPQR ABCDEFGHIJKLMNOPQR
Memory Card Options Memory Card Options
Image Capture Settings Image Capture Settings
Lens Correction Lens Correction
Cancel Cancel
1 2 3 4
HDR Capture HDR Capture
Exposure Mode Exposure Mode
OK OK